![unknown mechanism](https://v2rockethistory.com/wp-content/uploads/2018/04/repair-workshop-mechanism-e1525050230709-300x154.jpg)
In our exploration of the historical sites around Peenemünde we often encounter relics that are a mystery to us. If you recognise the item and can tell us anything positive about it (no guesses please, we have lots of those already!) it will be a big help and you can be sure we will credit your contribution to the solution. So, here’s this month’s Peenemünde mystery.
So can you help solve a small Peenemünde mystery?
We think the mechanism above might be the remains of a points switch or freight wagon lock system for a light factory railway (to move goods around on a large factory site). However, we found no obvious signs of railway lines nearby (but we have reason to think they might have been there anyway). We found the relic in the ruins of a missile production workshop in Peenemünde. The mechanism is obviously badly damaged and incomplete – but it’s still very robust and is mounted on a buried steel H or I girder. Note the connecting rod dangling from its support – on the extreme right of the right-hand picture – roughly cut to about 40mm long. It obviously communicated whatever this mechanism did to another structure. Note too the communicating bosses with triangular shaped shaft holes which pass all the way through the bosses. We are fairly confident this item dates from the WWII era from its structure, condition and method of ground anchor (welded to an I-beam and set into the concrete floor of the building).
It’s a small part of a bigger puzzle
Finding out what it is will help us identify precisely what happened in this part of the factory workshop and help tie the area to photographs we have of the interior. If you have a good idea of what it is please post a comment in the box below
![RAF reconnaissance photo Werk Süd 23-06-43](https://v2rockethistory.com/wp-content/grand-media/image/South-Works-23-06-43.jpg)
RAF reconnaissance photo showing the Werk Süd region with the F1 pre-production hall and to the north the IW repair and maintenance hall, centre right, and road rail links to Prüfstand XI (Test Stand 11, circular rampart centre left) heading directly left from F1. P-XI was conceived to provide engine test facilities for the nearby pre-production hall. Scroll down to see GPS map, the marker index is set to the centre of P-XI, click map and switch to satellite view and you will see that only a small section of the circular rampart remains visible. You can easily zoom out to cover the coast area where F1 and the equally large Repair & Maintenance Workshops are located. The area immediately surrounding P-XI is now contained within a commercial farming operation with sheep appearing to be the staple - or was anyway, at the time of our first visit to the vicinity in 2010 and our last in 2017 - none of the sheep seemed to recognise us though so they may have changed. (for access to restricted areas click here)
![RAF reconnaissance photo from 21/08/1944 of F1 region](https://v2rockethistory.com/wp-content/grand-media/image/F1_21-08-44_recce_photo.jpg)
RAF Recce photo taken 21st August 1944 of region around F1. The GPS marker for this photo is pegged on the lowest of the three fire fighting cisterns clearly visible in the image (in the center about a third the way up from the bottom of the image). Scroll down below this text for map and switch to 'Satellite view' where the fire fighting cistern can still be clearly seen today.(for access to restricted areas click here)
![IW and F1 on 19th August 1943](https://v2rockethistory.com/wp-content/grand-media/image/IW_and_F1_190843.jpg)
Photo showing Werk Süd with IW on the left and F1 on the right taken on 19th August 1943. The photo shows only light damage to the main halls, although F1 was actually hit at least 11 times, and hits to the separate single storey workshops to the right of the IW hall. The long storage (oil and paint?) shed above IW and the woodworking shop at the top of the picture appear undamaged. Anti-aircraft platforms (at least 3) can be seen on the roof of IW but that seem to be empty of guns. F1 shows two AAA platforms (there was at least 3 at this stage and maybe more) and they may have guns installed. General W. Dornberger mentions defensive AA artillery fire from the from the roof of F1 in his 1952 book V2 (1954 in English).
![Fertigungshalle Eins (F1) after the RAF raid of 1943](https://v2rockethistory.com/wp-content/grand-media/image/F1_corrected.jpg)
A rare photo of the giant F1 production hall taken not long after the RAF raid of 17/18th August 1943. F1 was a forced labour camp with at least 600 prisoners living within the factory and at least eleven were killed in the raid. Parts of the electrified barbed wire fence can be seen close to the factory building, in the clearing in the middle of the photo. Two anti aircraft gun emplacements can be seen on the roof at the front of the building. Holes in the side walls of the upper vaults can be seen as well as the damage to lower vaults 9 and 10 (counting from left) from a direct hit in this region. Also of note are the numerous guy ropes, attached to the upper roof of the front of the building - and running down towards the trees, that are just visible in the photo. These may be supports for camouflage netting that was in the process of being fitted (by prisoner gangs) just before the raid. The work was never completed.
![Peenemünde: Werk Sud attacked by US bombers August 1944](https://v2rockethistory.com/wp-content/grand-media/image/f1_attacked.jpg)
Peenemünde: Werk Sud attacked by US bombers August 1944 in a daring daylight raid. The two large halls F1 and IW in the lower middle of the photo are under direct attack and smoke can be seen originating from both buildings. Although the August 1944 raids did little to interrupt the volume manufacture of the V2, as virtually all manufacturing and assembly of the missile had moved to central Germany, the raids did bring to an almost complete halt the last small amount of manufacturing work still competed in the giant halls of Werk Sud.
![V2 fin relic near F1](https://v2rockethistory.com/wp-content/grand-media/image/V2_rocket_fin_relic_f1_2.jpg)
Picture shows parts of V2 missile fin structure laying on open ground near area between admin offices and F1 (near Admin. block railway platform, see map).
![Storage vessel within F1 boundary](https://v2rockethistory.com/wp-content/grand-media/image/storage_vesse_in_f1.jpg)
Picture shows metal debris within the F1 factory boundary walls. The purpose of the part buried liquid storage vessel in the foreground is unknown but it is not a vessel capable of being pressurised. Other assorted metal debris include pipe and cable wall cleats, as well as steel armature rods from reinforced concrete castings (powerful demolition explosions have freed the steel rods from the concrete). These reinforcement rods are a common sight in the environs of Fertigungshalle Eins (F1) and the nearby Repair & Maintenance Hall (R&MH).
![V2 Light-Beam radio environment case relic South of F1](https://v2rockethistory.com/wp-content/grand-media/image/light_beam_case_nr_F1.jpg)
The photo shows a Lichtstrahl empfänger (In English: Light-beam receiver) environmental protection case, originally one of a group of 40 or so we first found in 2010 abandon in an area adjacent to the train platform for the administration block. On subsequent visits this number has declined to just ten or so, mostly very decayed examples. The environmental casing was vital to the Lorentz Light-Beam equipment on-board the V2 missile as the critical radio frequency would otherwise drift with the large change in temperature as the missile climbed into the stratosphere. The case was thickly insulated with rock wool or fibre-glass strands and designed to help maintain a stable temperature - indeed, the same temperature as the radio equipment was when at ground level when calibration and adjustment was completed before launch. The F1 pre-production hall is located about 200m North-West of the point where this photo was taken. Scroll down to see map below (click map and switch to 'satellite view' for clearer indication of location).
![V2 missile debris field SE of F1](https://v2rockethistory.com/wp-content/grand-media/image/Screenshot_2018-05-12_16.43.21_copy.jpg)
This picture shows a small debris field of steel fragments from the V2 missile 130m South-East of F1, and just 20m to the North East of the foundations of a small heat distribution building. Various body and frame parts can be seen and in the middle foreground a 350mm segment of curved missile body ring is visible. These parts have almost certainly been dug up and exposed by the action of metal detectorists. The metal fragments have been abandoned by their finders as they are perceived to have no financial value and hence are not worth removing from the site.
![V2 missile debris near F1](https://v2rockethistory.com/wp-content/grand-media/image/V2_missile_parts_f1.jpg)
This picture shows a close up detail of parts in a small debris field of steel fragments from the V2 missile 130m South-East of F1, and just 20m to the North East of the foundations of a small heat distribution building. Various body and frame parts can be seen and in the upper left and two segments of curved missile body ring are visible. See previous.
![Wooden Carboy frame](https://v2rockethistory.com/wp-content/grand-media/image/carboy-frame-f1-1.jpg)
Wooden carboy frame from WW2 (possibly used for transporting small quantities of corrosive and dangerous liquids employed in the V2 steam plant, (such as T-Stoff) laying among trees 190m East of F1 in a location used as an emergency rail freight loading area to F1 due to damage caused by US air raids in August 1944.
![Wooden carboy frame examined](https://v2rockethistory.com/wp-content/grand-media/image/woden_carboy_frame_2.jpg)
Wooden carboy frame from WW2 (possibly used for transporting small quantities of corrosive and dangerous liquids employed in the V2 steam plant (such a T-Stoff) laying among trees 190m East of F1 in a location used as an emergency rail freight loading area for F1 due to damage caused to rail track by US air raids in August 1944.
![Collecting GPS data near F1](https://v2rockethistory.com/wp-content/grand-media/image/Screenshot_2018-05-12_16.17.10_copy.jpg)
This picture shows Robert Dalby collecting GPS data with a mapping camera just North of the East end of the Admin office rail platform (near the ruins of the small admin/F1 heat distribution hub building). In all of our explorations we routinely collect GPS track and data points to be able to accurately locate finds and establish a precise correlation between areas of interest identified on historical reconnaissance photography and the modern ground terrain. In the picture Robert is pointing a Contour video camera at details of the terrain that automatically captures the camera's GPS location information. This data can then be combined with satellite imagery, via Google maps, and provide a detailed graphic mapping track alongside the video footage.
![1944 bomb crater near R&MH](https://v2rockethistory.com/wp-content/grand-media/image/bomb_crater_werk_sud_1944.jpg)
This video still shows Robert in front of a bomb crater on the West or opposite side of the rail lines and road that pass the Repair & Maintenance Hall (R&MH). The crater like so many others, created in a fraction of a second, in August 1944 during a US air raid, has developed in to a thriving eco-system that now teems with all kinds of life. After the passage of more than 70 years the crater is still deep and well defined. There are hundreds of craters like this in the area.
![1944 bomb near R&MH - 2nd view](https://v2rockethistory.com/wp-content/grand-media/image/bomb_crater_werk_sud_1944_2.jpg)
This video still shows the same bomb crater from a slightly different angle. The crater like so many others, created in a fraction of a second in August 1944 during a US air raid, has developed in to a thriving eco-system that now teems with all kinds of life. After the passage of more than 70 years the crater is still deep and well defined. There are hundreds of craters like this in the area.
![V2 aerodynamic fin relics](https://v2rockethistory.com/wp-content/grand-media/image/V2_missile_parts_F1_prisoner_area.jpg)
V2 missile parts in F1 prisoner turn-out or 'free movement' area. The location referred to is a large triangular shaped area situated on the South-East side of the pre-propuction hall Fertigungshalle Eins (F1). The area was fenced off with a high barbed wire fence (a portion of which was electrified) with guard towers every 60 metres.
![V2 missile parts in F1 prisoner 'exercise' area](https://v2rockethistory.com/wp-content/grand-media/image/Fertigungshalle_1_relics_triangular_area.jpg)
V2 missile parts in F1 prisoner 'exercise' area. Image grab from Fertigungshalle Eins (F1) video.
![Still frame from F1 video](https://v2rockethistory.com/wp-content/grand-media/image/Screenshot_2018-05-12_15.50.52_copy.jpg)
This image shows part of a pile of concrete castings that form the below ground foundations for part of the electrified fence that was built around F1 in the summer of 1943. The fence was built on the instructions of Arthur Rudolf, who was responsible for F1, by the first 200 forced labourers to arrive at the F1 labour camp in June 1943. These crude castings are the result of digging a narrow hole in the ground for the concrete fence post and filling the area around the post with the concrete mix. The sizable variation in the depths of the concrete castings, and the fact that in a number of casting blocks the post has plunged through the concrete mix and penetrated from 100 to 300mm into the ground below, strongly suggests this work was carried in hast and/or by men inexperienced in the normal procedures of this type of basic ground-work.
![Another screen grab from F1 video](https://v2rockethistory.com/wp-content/grand-media/image/Screenshot_2018-05-12_12.54.13_copy.jpg)
This image shows part of a pile of concrete castings that form the below ground foundations for part of the electrified fence that was built around F1 (see previous photo for details). You can see the area that these posts once secured in the second black and white recce image in this gallery. The fenced off area is the large triangular shape you can see joining the North-East South-East corners of F1 (ie the long wall of F1 facing the shore). Quite why and exactly when someone mustered men or machines to pluck these lumps of concrete out of the ground and move them 100 to 200m is beyond me - why not just bulldoze them under like everything else on this site?
![F1: remains of wooden formers used in construction](https://v2rockethistory.com/wp-content/grand-media/image/SAM_0321.jpg)
These timber parts, found just outside the North East corner of the F1 factory, are reminiscent of the wooden roof formers used to create the shuttering for the vaulted concrete roof of F1. However they differ in a number of respects and are assumed to be parts used in the final construction, repair, or modification activity perhaps after the RAF raid of 17/18 Aug 1943. Metal shoes and wear plates (shown in photo) indicate that the formers were intended for repeated use.
![Loading pan of station No 9 next to F1](https://v2rockethistory.com/wp-content/grand-media/image/Loading_area_of_station_No9.jpg)
This video screen grab shows the rail and road loading station 9 (also called Die Verladerampen or in English, The loading ramps). The wall and light coloured concrete pan in the background is from the 1940s.
![F1/Admin rail platform area: Small concrete enclosure](https://v2rockethistory.com/wp-content/grand-media/image/SAM_0297.jpg)
This small prefabricated concrete enclosure only has 800mm of wall section remaining. It is situated on the south side of the rail line and about 70m from the West end of the F1/Admin railway platform south of the factory (see map belew). Its function is not known to us but it may have housed electrical relay equipment.
![Ruins of materials storage station No 9 next to F1](https://v2rockethistory.com/wp-content/grand-media/image/Screenshot_2018-05-12_15.57.41_copy.jpg)
This video screen grab shows Robert about to climb the steps up onto the rail and road loading station 9 (also called Die Verladerampen or in English, The loading ramps). This storage and loading facility was never finished during the war and was intended to be a more elaborate with large storage buildings - but the pressure of war and constant use of the area prevented further development. The area is still surprisingly intact today with a strong correspondence between modern ground detail and historical reconnaissance photography.
![F1 V39 to V37 area below Trafo Station II](https://v2rockethistory.com/wp-content/grand-media/image/SAM_0319.jpg)
F1 Pre-Production Hall. The area below transformer station no2 (Trafo Station II). Prisoners are known to have hidden and slept in this narrow area. The first time we explored this very low and confined area in April 2011 we found the remains of two small mattresses. This is one of only a handful of areas among the ruins of F1 that still has a ceiling.
![F1 V39 to V37 area below Trafo Station II](https://v2rockethistory.com/wp-content/grand-media/image/SAM_0346.jpg)
F1 Pre-Production Hall. The area below transformer station no2 (Trafo Station II) seen from inside. Prisoners are known to have hidden and slept in this narrow area. The first time we explored this very low and confined area in April 2011 we found the remains of two small mattresses. This is one of only a handful of areas among the ruins of F1 that still has a ceiling.
![The IW 'oil shed' loading stage](https://v2rockethistory.com/wp-content/grand-media/image/Oilshed.jpg)
The remains of the a rail and truck loading stage located in the long oil storage shed adjacent to the IW repair and maintenance hall (IW R&MH) are substantial and have intact steadying chains along the south edge of the platform. There are access steps to the west and east ends (east shown). This loading stage was originally furnished with a wooden platform.
![The IW 'oil storage shed' loading stage](https://v2rockethistory.com/wp-content/grand-media/image/SAM_0137.jpg)
Another shot of oild shed rail and truck loading stage showing steadying chains along the south edge of the platform. Steel studs can be seen that originally held the timber framework of the platform.
![Cut girders of Oil Storage Shed](https://v2rockethistory.com/wp-content/grand-media/image/SAM_0118.jpg)
A gas and oxygen lance has been used to cut through the I-beams and girder supports that comprised the main wall and roof supports of the long 'oil storage' shed adjacent to the east-side of IW R&MH. The tapering stone with the letters FK moulded into the top, would appear to be a location marker - possibly to direct traffic to the correct doors of the main building. We found others like this in the vicinity.
![Cut post with door hanger](https://v2rockethistory.com/wp-content/grand-media/image/oil-shed-cut-girder.jpg)
Photo shows the cut stump of an heavy upright support girder. The ragged profile of the cut shows that it has been cut down with an oxygen and gas torch or possibly a larger fuel and oxygen device like a thermal lance. The steel support still has the bottom support pin for a large door. Note that although the girders have been gas-cut there is a great deal of mechanical damage to the steel work that was not caused by the cutting work. Considerable force would be required to bend the middle girder in the way shown, even if it was much longer at the time the bend was created. The upper superstructure of the storage shed may have been part demolished using a bulldozer. Or perhaps the East German Army may have used the site for explosives training - signs of demolition explosive use are in evidence nearby. The map under the album presentation of this picture shows the exact location of the girders.
![East German army shooting range near F1 and admin area](https://v2rockethistory.com/wp-content/grand-media/image/F1_emergency_rail_freight_area.jpg)
Photo shows the remains of a shooting range built by the East German Army. In 1944 the area about 200m in front of the camera and to the left of this picture is the emergency rail-loading area used after US air raids in August damaged rail lines and other regular freight loading infrastructure. Today, it is a peaceful thoroughfare used mostly by deer and rabbits.
Be the first to comment