No Picture

Remains of 36 volt battery cells used on the V2 to power onboard equipment. ©THBC

Remains of 36 volt battery cells used on the V2 to power onboard equipment. ©THBC

Photo shows rare surviving complete set of 8 lead acid battery cells from one of the V2 rocket’s 32 volt (100 amp) lead acid batteries. Two sets of batteries like this were used to provide the direct current (DC) voltage used aboard the V2 missile to power the DC to 3-phase alternating current (AC) generators, that in turn, powered the gyroscopes, electro-hydraulic servos, trim motors and other vital guidance and control devices. Photo copyright: The Horst Beck Collection

Album: Missile guidance equipment

Categories: Missile guidence V2 Missile relics

Tags: #LEV-3 gyroscope system #Control surface servos #V2 Missile relics

No Picture

A4-V2 50 volt command or signalling battery. ©THBC

A4-V2 50 volt command or signalling battery. ©THBC

Photo shows rare surviving 1.2 volt cell from the V2 missile’s 50 volt command or signalling battery used in its gyro guidance system (note, the terminal connection on the left is missing from this exhibit, it would be identical to the one on the right). This wet nickel-cadmium battery cell was combined in pairs to a total set of 21 providing a 50.4 voltage at 300mA. The cells were contained in a wooden box that was held on a rack in equipment bay III. Its function was to provide the direct current (DC) signalling voltage that communicated the moment to moment resistance of the gyroscope’s potentiometers to the analog guidance computer (Mischgerät = Mixer-device or control amplifier) aboard the V2 missile. It was critical that the signalling voltage was maintained between 48 and 50.4 volts. Photo copyright: The Horst Beck Collection

Album: Missile guidance equipment

Categories: Missile guidence V2 Missile relics

Tags: #LEV-3 gyroscope system #V2 Missile relics