A4-V2 50 volt command or signalling battery. ©THBC

A4-V2 50 volt command or signalling battery. ©THBC

Photo shows rare surviving 1.2 volt cell from the V2 missile's 50 volt command or signalling battery used in its gyro guidance system (note, the terminal connection on the left is missing from this exhibit, it would be identical to the one on the right). This wet nickel-cadmium battery cell was combined in pairs to a total set of 21 providing a 50.4 voltage at 300mA. The cells were contained in a wooden box that was held on a rack in equipment bay III. Its function was to provide the direct current (DC) signalling voltage that communicated the moment to moment resistance of the gyroscope's potentiometers to the analog guidance computer (Mischgerät = Mixer-device or control amplifier) aboard the V2 missile. It was critical that the signalling voltage was maintained between 48 and 50.4 volts. Photo copyright: The Horst Beck Collection

About V2 Rocket History 10 Articles
At V2 Rocket History our aim is to investigate the history and technology of the A4-V2 missile, and share the results in the most accessible and engaging way possible. Our general approach is to highlight the engineering and industrial aspects of the subject.

Be the first to comment

Leave a Reply

Your email address will not be published.


*