No Picture

Fuel injector 3304D water test comparison

Fuel injector 3304D water test comparison

3304D higher volume injector insert (with central jet) showing comparison nebular and jet stream pattern with high and low pressure. Top image shows correct hollow cone-shaped aerosol effect from central 6mm orifice, that is also creating a fine mist around and within the cone, and strong single central (non-swirl) jet can be seen as well as 4 steady steams emanating from cooling pores. Bottom image shows the effect of reduced pressure: a dropping poorly formed cone, composed of larger slower moving droplets, and a tendency for the thicker spray to combine and cause ‘dribbeling’ with much fluid failing to clear the injector face. The appearance of central jet however seem largely unchanged.

Album: Testing fuel injectors

Categories: Combustion

Tags: #Test procedures #Combustion and injection #Propellent injector system

No Picture

Collection Parts of the ‘Standard’ series A head

Collection Parts of the 'Standard' series A head

Parts of the ‘Standard’ series A aluminium head from 1941. The brass injector insert type and position pattern on the relics seem to be of the standard type but the pattern is non-standard in that higher volume injectors with three inlet apertures (two centrifugal and one central) have been place nearest the LOX
injector. Photo courtesy Horst Beck

Album: A4-V2 Injection head, combustion chamber, and nozzle

Categories: Combustion

Tags: #Combustion and injection #Propellent injector system

No Picture

Industrial magazine advert for Gustav Schlick 1918

Industrial magazine advert for Gustav Schlick 1918

Industrial magazine advert for Gustav Schlick printed in 1918 and showing graphic of steam boiler jets. The company, formed in 1902, had a wide expertise in all aspects of industrial spray technology and were able to steer the direction of fuel injector development along fruitful lines after they became consulting contractors to Dr Walter Thiel’s combustion research group in 1937.

Album: V2 rocket fuel injector inserts

Categories: Combustion

Tags: #A4-V2 supply contractor #Propellent injector system #Combustion and injection